Risk Assessments & Safe Working
How to Carry Out a Workplace Risk Assessment
Guidance dated 11 September 2026
A workplace risk assessment helps you decide what could harm people and what you need to do about it. The useful output is a set of controls that people can apply. The document records those decisions and helps you check they remain appropriate.
In Great Britain, employers must make a suitable and sufficient assessment of risks to employees and others affected by their work. Employers with five or more employees must record the significant findings. Northern Ireland has separate regulations and a similar general recording threshold. [7,8]
Define the activity before assessing it
Choose a scope that makes sense. “Workshop activities” may be too broad if it includes fabrication, vehicle movements, spraying and maintenance. “Using a keyboard” may be too narrow to capture the wider workstation and working pattern.
Describe what the activity involves, where it takes place and who carries it out. Include the equipment, materials and normal sequence. Ask what happens during setup, cleaning, breakdowns and shutdown, as well as routine operation.
A good assessment needs relevant competence and input from people who understand the task. Where specialist risks exceed your knowledge, obtain appropriate assistance rather than filling the gap with assumptions.
Identify hazards and who could be harmed
A hazard is something with the potential to cause harm. Risk concerns how likely that harm is and how serious it could be. Look at actual conditions, available equipment information, previous concerns and the experience of workers. [7]
Include people outside the immediate team. A delivery route might expose office staff crossing the yard, visiting drivers and maintenance contractors. Consider whether anyone needs different arrangements because of inexperience, disability, pregnancy or other relevant circumstances.
Be precise about the harm. “Manual handling” is a topic. “A person strains their back while lifting awkward cartons from floor level” describes a situation you can improve.
Decide whether the controls are enough
List what is already in place and verify it. Do not credit a guard, extraction system or training programme that is only planned. Then decide what further action is needed, using the hierarchy of control to consider stronger measures before relying on personal protection. [9]
For example, if people repeatedly lift cartons from the floor, look at the delivery format, storage height and handling aids. Telling them to lift carefully may leave the underlying problem unchanged. Test proposed changes with the people who will use them.
A numerical matrix can help organise priorities, but it does not decide whether a control is adequate. Avoid adjusting a likelihood score merely to make an unresolved risk appear acceptable.
Record decisions that someone else can follow
Make the record specific enough to guide action. Include the activity, affected people, significant hazards, current controls, further measures, action owners and timescales. Identify who completed the assessment and when it should be checked again.
Compare these two actions: “Improve housekeeping” and “Provide a designated pallet return area outside the pedestrian route, assigned to the warehouse manager before the next delivery cycle.” The second gives someone a task they can complete and another person something they can verify.
If safe working depends on a particular sequence, isolation or coordination between teams, connect the assessment to suitable instructions or a method statement. Do not leave essential controls buried in a form that workers never see.
Put the assessment into use
Explain the relevant findings to the people affected. Use a demonstration or walk-through where that helps. Check they can describe the safe method, recognise a problem and identify when to stop and seek help.
After implementation, observe the task again. Has the change reduced the risk? Has it created a new obstruction or encouraged a workaround? Record the outcome and amend the assessment if necessary.
Review when circumstances change or evidence suggests the assessment is no longer valid. A planned review date supports that process; it should never prevent an earlier response to a problem.
FAQs
Is a five by five risk matrix compulsory
No. The general legal requirement is for a suitable and sufficient assessment. A matrix is an optional tool and cannot replace sound judgement about hazards and controls.
Can one assessment cover several sites
It can provide a common basis where tasks are genuinely comparable, but local conditions must be checked. Access, equipment, people and emergency arrangements may require site-specific changes.
Do employees need to sign the assessment
There is no blanket requirement for employee signatures on every general risk assessment. Record briefings where useful and check understanding. Signatures do not transfer responsibility to employees.
How Secure Safety Solutions can help
Secure Safety Solutions can help prepare or review assessments that reflect the work being carried out. We work with your team to identify meaningful controls, clarify actions and connect the assessment to the safe working method.
Sources and further reading
- [7] HSE: Steps needed to manage risk
- [8] HSENI: Risk assessment
- [9] HSE: Managing risk using PPE and the hierarchy of controls
General guidance. The arrangements you need depend on your activities, premises and location.
