
Knowledge Hub
Clear answers to your health & safety questions
Practical guidance for employers and managers on workplace health & safety, fire safety, COSHH, risk assessments and CDM. Search for an answer or browse the topics below.
Browse our guides
Asbestos Management: What Should Be in Place Before Maintenance Starts?
Planning maintenance or refurbishment? Understand asbestos information, survey limitations and the checks needed before contractors disturb building materials.
Read the guide →People & Workplace HealthNoise at Work: When Should Employers Take Action?
Understand workplace noise action levels, hearing protection and hearing checks, with practical advice for managing exposure across the working day.
Read the guide →Engineering & Automotive SafetyPUWER Explained: What Should Employers Check About Work Equipment?
A practical introduction to PUWER, covering equipment suitability, guarding, maintenance, inspections and training for the people using it.
Read the guide →Workplace SafetySlips and Trips: Why a Wet Floor Sign Is Only Part of the Answer
Reduce workplace slips and trips by improving cleaning, flooring, access and reporting. Practical guidance for busy premises and shared workplaces.
Read the guide →People & Workplace HealthHealth Surveillance: When Do Employers Need More Than a Risk Assessment?
Understand when workplace health surveillance may be required, how it differs from wellbeing checks and how employers should act on the findings.
Read the guide →Workplace SafetyManual Handling Risk Assessments: What Should Employers Check?
Assess manual handling risks beyond the weight of a load. Understand employer duties, handling aids, task design and when training needs practical support.
Read the guide →Workplace SafetyWorking at Height: What Employers Need to Plan Before Work Starts
Plan work at height with the right precautions. Understand equipment selection, ladder use, fragile surfaces, supervision and emergency arrangements.
Read the guide →Workplace SafetyLone Working Risk Assessments: What Should They Cover?
Understand lone working risks, task limits, check-in arrangements and emergency responses. Build an assessment that works beyond the written procedure.
Read the guide →People & Workplace HealthWork Related Stress Risk Assessments: A Practical Guide for Employers
Assess work related stress by examining workload, support and working arrangements. Find practical steps for employee input, action plans and review.
Read the guide →People & Workplace HealthDSE Assessments: What Employers Need to Know About Screen Work
Understand DSE assessments for office and home workers, including workstation checks, breaks, eye tests and following up on reported discomfort.
Read the guide →COSHH & Hazardous SubstancesSilica Dust at Work: Employer Duties and the 2026 Engineered Stone Update
Understand silica dust controls and HSE's 2026 engineered stone guidance, including water suppression, respiratory protection and exposure assessment.
Read the guide →Engineering & Automotive SafetyWelding Fumes: What Controls Should a Workshop Have?
Review welding fume controls for indoor and outdoor work. Understand extraction, respiratory protection and why short welding jobs still need controls.
Read the guide →COSHH & Hazardous SubstancesLEV Testing: How Often Should Dust and Fume Extraction Be Checked?
Understand LEV examination intervals, everyday checks, maintenance records and follow-up. Find out what a dust or fume extraction test should establish.
Read the guide →COSHH & Hazardous SubstancesFace Fit Testing and RPE: What Employers Need to Get Right
Understand face fit testing, respirator selection, facial hair and pre-use checks. Make sure the protection issued matches the wearer and the work.
Read the guide →Legal Updates & RegulationMartyn's Law: What Premises Managers Should Understand Before It Starts
Understand Martyn's Law, who may be in scope and what to prepare. A dated guide separating the new Act from duties not yet in force.
Read the guide →Legal Updates & RegulationRIDDOR Changes Proposed in 2026: What Employers Should Know
Understand HSE's 2026 RIDDOR consultation, what it proposed and why employers must keep using current reporting requirements until changes take effect.
Read the guide →Health & Safety ManagementHealth & Safety Responsibilities for Employers: A UK Guide
Understand your responsibilities as an employer, from risk assessments and competent advice to training, consultation and checking controls work.
Read the guide →Health & Safety ManagementDo I Need a Health & Safety Policy?
Find out when a written health and safety policy is required, what it should contain and how to keep it useful as your business changes.
Read the guide →Risk Assessments & Safe WorkingHow to Carry Out a Workplace Risk Assessment
A practical guide to workplace risk assessments: identify hazards, choose controls, record significant findings and check what happens in practice.
Read the guide →Risk Assessments & Safe WorkingHow Often Should Risk Assessments Be Reviewed?
Learn when to review a risk assessment, what should trigger an early review and why changing the review date is not enough.
Read the guide →Risk Assessments & Safe WorkingRisk Assessment vs RAMS: What's the Difference?
Understand how risk assessments and method statements work together, what RAMS should contain and how to make them specific to the job.
Read the guide →Risk Assessments & Safe WorkingWhat Is the Hierarchy of Control?
Learn how to use the hierarchy of control to choose stronger safety measures, with practical examples and advice on avoiding common mistakes.
Read the guide →Fire SafetyFire Risk Assessments: A Guide for Businesses
Understand what a business fire risk assessment should cover, who is responsible and how to turn the findings into clear, prioritised action.
Read the guide →Fire SafetyHow Often Should a Fire Risk Assessment Be Reviewed?
Find out when a fire risk assessment needs reviewing, why annual reviews are not a universal legal rule and what changes require earlier action.
Read the guide →Fire SafetyWho Is Responsible for Fire Safety in the Workplace?
Understand Responsible Person duties, landlord and tenant responsibilities, and why appointing a fire marshal does not transfer legal responsibility.
Read the guide →Fire SafetyFire Door Checks: What Should You Look For?
Learn what to look for during routine fire door checks, how to record defects and when specialist inspection or repair is needed.
Read the guide →COSHH & Hazardous SubstancesCOSHH Assessments: What Employers Need to Know
Understand what a COSHH assessment should cover, how to assess actual exposure and why a folder of safety data sheets is not enough.
Read the guide →COSHH & Hazardous SubstancesSafety Data Sheet vs COSHH Assessment: What's the Difference?
Understand the difference between a safety data sheet and a COSHH assessment, what each does and how to turn product information into safe working.
Read the guide →Construction & CDMWhat Is a Construction Phase Plan and When Do You Need One?
Learn when a construction phase plan is required, who prepares it and what it should contain for a proportionate, well-managed construction project.
Read the guide →Construction & CDMCDM 2015: What Clients Need to Know
Understand commercial client duties under CDM 2015, including appointments, pre-construction information, planning, welfare and project oversight.
Read the guide →Audits & ComplianceWhat Should a Health & Safety Audit Include?
Find out what a useful health and safety audit should examine, the evidence to prepare and how to turn findings into improvements that last.
Read the guide →People & Workplace HealthHow Many First Aiders Does My Workplace Need?
Work out suitable first-aid cover using your workplace risks, staffing and shifts, and understand the difference between first aiders and appointed persons.
Read the guide →Accidents & IncidentsWhat Accidents Need to Be Reported Under RIDDOR?
Understand RIDDOR reportable injuries, reporting deadlines and the difference between recording an accident and reporting it to the regulator.
Read the guide →Contractors & Facilities ManagementContractor Management: What Should You Check Before Work Starts?
Check contractor competence, task planning, site information and emergency arrangements before work starts, then monitor what happens on site.
Read the guide →Training & CompetenceWhat Health & Safety Training Do Employees Need?
Identify the health and safety training your employees need, choose suitable delivery and check competence beyond the training certificate.
Read the guide →Health & Safety ManagementHealth & Safety Checklist for Small Businesses
Use this practical checklist to review your small business’s health and safety arrangements, identify gaps and decide what needs attention first.
Read the guide →Health & Safety ManagementDoes my business need a competent person?
Understand competent assistance and when external support can help.
Read the guide →Health & Safety ManagementWe have employed our first member of staff. What health and safety do we need?
A starting point for businesses employing their first team member.
Read the guide →Audits & ComplianceWhat happens during an HSE inspection?
Understand what an inspector may ask and how to prepare your arrangements.
Read the guide →Quick answers
Is a safety data sheet the same as a COSHH assessment?
No. A safety data sheet describes a product and its hazards. A COSHH assessment considers how people could be exposed during the work in your workplace and what controls are needed.
Use the supplier information as a starting point, then consider the task, quantities, frequency, ventilation and people involved. Include hazardous substances created by the work, such as dust, even where there is no supplied product sheet.
Where to start: list the substances and processes used, gather current safety information and review how exposure is controlled in practice. Check that employees understand the controls and that those controls work.
Who needs a DSE workstation assessment?
HSE says a workstation assessment is required where workers normally use display screen equipment daily for continuous periods of an hour or more.
The assessment should consider the whole setup, including the screen, keyboard, chair, desk, surroundings, work activity and any individual requirements. Completing a checklist is a starting point. Problems identified need to be followed up.
When to revisit it: when a new user starts, a workstation is introduced or changed, or someone reports pain or discomfort. HSE recommends that a trained assessor reviews assessment results and makes sure problems are addressed.
How do we decide what first aid provision we need?
Start with a first-aid needs assessment. The right arrangements depend on your workplace, workforce and risks, rather than a single rule that suits every business.
As a minimum, employers need a suitably stocked kit, someone appointed to take charge of first-aid arrangements and information for employees about those arrangements. Your assessment may identify a need for trained first-aiders, additional equipment or facilities.
An appointed person is not the same as a trained first-aider. Consider who will be available whenever people are working, including during absences, and make sure staff know how to get help.
Does a small business need a written health and safety policy?
Every business needs a policy for managing health and safety. If you employ five or more people, the policy must be written down. For smaller employers, a written policy can still be useful.
It should explain how health and safety is managed, who is responsible and how arrangements work. Share the policy and changes with employees so they understand what is expected.
Where to start: identify who makes decisions, who carries out key tasks and how you check that arrangements are being followed. A policy should describe your business accurately, including the responsibilities people actually hold.
Is there a maximum weight someone can lift at work?
The law does not set a single maximum lifting weight. Weight matters, but it is only one part of assessing manual handling risk.
Employers should avoid hazardous manual handling where reasonably practicable. Where it cannot be avoided, assess the risk of injury and reduce that risk as far as reasonably practicable.
Where to start: look at the task before arranging training. Could the load be moved mechanically or the work reorganised? Consider carrying, pushing and pulling as well as lifting. The aim is to reduce exposure to the hazardous activity, with suitable instructions and training supporting the controls.
What should we consider before someone works alone?
Employers must manage the risks before people work alone. Lone working can include cleaning, maintenance, deliveries, security and home working, not only work in isolated locations.
Consider what could happen if the worker becomes ill, has an accident or cannot get assistance. The absence of a colleague or direct supervision can make an existing risk more serious.
Where to start: identify who works alone and the activities they undertake. Use that information to decide whether the work is suitable for lone working and what support, communication and emergency arrangements are needed. Review the arrangements when activities or circumstances change.
What is PUWER and why does it matter for machinery?
PUWER stands for the Provision and Use of Work Equipment Regulations. It concerns the safe use of equipment at work, including machinery and tools.
HSE guidance covers equipment suitability, inspection, maintenance, training and competence. Buying equipment is only part of the process: you also need arrangements for using and maintaining it safely.
Where to start: identify the equipment in use and review the instructions, maintenance arrangements and training records. Consider whether an inspection is needed and whether the people using the equipment have the information and competence required. The checks should reflect the equipment and how it is used.
