Workplace Safety
Lone Working Risk Assessments: What Should They Cover?
Guidance dated 11 September 2026
A lone working assessment needs to answer a practical question: what happens if the person cannot deal with a problem or summon help? A phone number and an instruction to be careful do not answer it.
This article follows HSE guidance for Great Britain. Northern Ireland has its own health and safety framework; check the applicable duties for operations there.
Identify when people work alone
HSE describes lone workers as people working without close or direct supervision. They may be mobile, at home, on a customer's premises or in a building where other people are elsewhere. Employers must manage the risks before people work alone. [8]
Look at the working pattern as well as the job title. A normally busy office may become a lone working environment during an early opening or late finish. A maintenance employee can be isolated in a plant area while the rest of the premises remains occupied.
Include occasional arrangements. Covering an absence, attending a call-out or making an extra visit can create conditions that the usual daytime assessment does not address.
Decide which work is suitable
Consider how working alone affects the ability to control hazards and get assistance. Look at the task, location, contact with other people and foreseeable emergencies. Some higher-risk work requires another person; lone working should not be treated as acceptable simply because staffing is limited. [9]
Set clear boundaries. Explain which jobs may be done alone, which need approval and which require additional people or specialist arrangements. Make sure the boundary is expressed in terms staff can recognise during the work.
For example, an employee attending a routine inspection may find damaged equipment. Authorisation to inspect should not quietly become permission to attempt an unfamiliar repair alone. Give them a clear route for reporting the change and obtaining support.
Design contact around the risk
HSE expects employers to monitor lone workers and keep in touch. Contact intervals, supervision and alarm arrangements should reflect the risks. Systems and emergency procedures should be tested. [10]
Decide who receives a check-in and who covers that role during breaks or absence. Agree what a missed contact means, how quickly it will be investigated and what information the responder needs. “Call the manager” is incomplete if the manager is unavailable.
Test communication in the actual location. A basement, remote site or customer building may have poor reception. If the arrangement depends on a device, consider charging, faults and whether the employee could operate it during the foreseeable emergency.
Plan the response as carefully as the alarm
A monitoring system can show that something is wrong without making assistance available. Keep location details accurate and ensure the responder knows relevant access arrangements. Decide how changes to the visit or expected finish time will be communicated.
Run a simple practice scenario: the worker misses a check-in and does not answer. Ask the nominated responder to explain their next steps. Any uncertainty about location, escalation or access identifies an arrangement to improve before relying on it.
Give people permission to stop
Explain the risks, limits and procedure during training, then check understanding. A new employee may need closer supervision while learning the work and the circumstances in which advice is needed. [10]
Make it clear that an unexpected condition can justify stopping the task. Review reports of missed contacts, failed devices and visits abandoned for safety reasons. These events provide useful evidence about how the system works, even when nobody is injured.
FAQs
Is lone working illegal?
There is no general ban. You must assess and control the risks, and some work is unsuitable for a person working alone or has specific restrictions. [9]
Do we have to buy a lone worker alarm?
The assessment should determine the arrangements needed. A device may help, but it needs a reliable response process and is not a complete control on its own. [10]
Can someone be a lone worker in an occupied building?
Yes. Working without nearby supervision or assistance can create lone working risks even when other people are elsewhere on the premises. [8]
How Secure Safety Solutions can help
We can help you review which tasks involve lone working, test your contact and escalation arrangements and make the limits clearer for staff. The aim is a procedure people can use when circumstances change.
Review your lone working arrangements
Sources and further reading
- [8] HSE: Protect those working alone
- [9] HSE: Manage the risks of working alone
- [10] HSE: Lone worker training supervision and monitoring
General guidance. The arrangements you need depend on your activities, premises and location.
