← Knowledge Hub

Workplace Safety

Manual Handling Risk Assessments: What Should Employers Check?

A manual handling assessment should explain what makes a task demanding and what you will change to reduce the risk. Recording the weight of a box is only part of that decision.

This guide covers the Great Britain framework. Northern Ireland has separate manual handling legislation, so check the applicable requirements for work there.

Start with whether the handling is necessary

The legal approach is to avoid hazardous manual handling where reasonably practicable, assess unavoidable hazardous tasks and reduce the risk of injury so far as reasonably practicable. Manual handling includes pushing, pulling, carrying and supporting loads, as well as lifting. [1]

Look at the process before deciding how someone should move the load. Could a delivery go directly to its point of use? Could packaging, storage or the order of work remove a repeated transfer? A handling problem can begin with a purchasing decision made weeks before the load arrives.

Assess the task as it happens

Observe a representative job and talk to the people doing it. Look at reaching, twisting, distance, frequency, available space and the stability of the load. Consider differences between the first movement of the day and the same movement repeated throughout a shift.

For example, a box may be straightforward to move from a bench but awkward to retrieve from behind other stock. An assessment based on the bench transfer will miss the part that needs attention. Include returns, damaged packaging and deliveries arriving when normal storage is full.

HSE's risk filters can help identify low-risk handling and when more detailed assessment is needed. Their figures are screening guidance, not legal safe lifting limits. There is no single statutory maximum weight that makes a lift safe for everyone. [1,2]

Choose changes that people can use

Possible improvements include reducing unnecessary handling, changing storage positions or providing suitable handling equipment. Check the whole journey before choosing an aid. A trolley that cannot pass through a doorway or travel over the floor surface will soon be left unused.

In a workshop, consider how components move between delivery, storage, the vehicle and the workbench. Suitable handling aids can reduce the need for people to support awkward parts while also trying to position them. HSE provides specific manual handling guidance for motor vehicle repair. [4]

Trial a proposed change with the people who will use it. Ask what happens when the equipment is unavailable, needs charging or is being used by another team. Resolve those arrangements before presenting the task as controlled.

Make training support the method

Generic lifting-technique training is not an effective substitute for changing a poorly designed job. HSE advises businesses to address how the work is organised and carried out. [3]

Once a suitable method is established, explain it and check that people can apply it. Show where aids are kept, what their limitations are and when someone should stop and ask for help. Include temporary staff rather than assuming a brief placement makes the task less demanding.

Check whether the change worked

Record the task, significant risks, agreed changes and who will follow them through. Revisit the work after implementation. A photograph of new equipment does not show that it is available at the right time or being used for the intended job.

Review the assessment when the load, route, frequency or working arrangements change, or when reports of difficulty suggest the controls need attention. Make it easy to report an awkward task before an injury becomes the reason for reviewing it.

FAQs

Is 25 kg the legal lifting limit?

No. The law does not set a universal safe lifting weight. The task, environment, load and individual all matter; a lighter load can still create significant risk. [1]

Does using two people automatically make a lift safe?

No. The team still needs a suitable method, space, coordination and a load it can control. Assess the actual operation rather than simply dividing its weight between two people.

Is a manual handling course enough?

Training should support effective controls. It will not resolve poor access, unsuitable storage or a task that should be avoided or redesigned. [3]

How Secure Safety Solutions can help

We can help you examine the task, review your assessment and turn the findings into practical changes. Bring us the operation people find difficult, together with the arrangements you already have, so we can focus on what needs to improve.

Review your manual handling arrangements

Sources and further reading

General guidance. The arrangements you need depend on your activities, premises and location.