Knowledge Hub

Workplace Safety

Slips and Trips: Why a Wet Floor Sign Is Only Part of the Answer

Find out why the floor becomes unsafe

A wet entrance, leaking appliance or trailing cable can become so familiar that people work around it.

Effective prevention starts by identifying how the hazard arises. Consider contamination, cleaning methods, floor condition, lighting and obstructions together. A floor that performs well when dry may become slippery when water, grease or other material reaches it. HSE: Causes and prevention of slips and trips.

For a busy premises manager, this means looking at the workplace during normal activity: deliveries arriving, cleaning taking place and people moving between tasks.

Make cleaning part of the control

Cleaning can remove contamination, but it can also leave a temporary slip risk.

Check whether the method suits the surface and how the area is managed while it dries. Where necessary, restrict access with suitable barriers or arrange cleaning so people can use a safe alternative route.

Warning signs can alert people, but they do not prevent access or remove the hazard. HSE recommends keeping people away from wet cleaning areas and removing signs when the area is safe. HSE: The importance of floor cleaning.

Avoid a situation where the cleaner finishes the task but nobody checks whether the floor is ready to reopen.

Deal with recurring problems

If water reaches the same place every day, repeated mopping deserves a closer look.

The practical solution may involve repairing a leak, improving drainage, changing matting or reviewing the floor surface. Cleaning routines should support those improvements. HSE: Slip and trip hazard checklist.

For example, an entrance may look acceptable during a morning inspection but become saturated during heavy rain. Assign responsibility for checking it when conditions change.

Record recurring locations and ask what would prevent the problem returning.

Keep routes usable throughout the day

A route can be clear at opening time and obstructed an hour later by stock, waste or deliveries.

Agree where items can be placed temporarily and who moves them. Include back-of-house areas, where employees may be carrying loads or concentrating on another task.

In shared buildings, establish how your team reports defects outside your direct control. A message to a managing agent should include the location, the problem and any immediate action needed.

Learn from close calls

Ask employees where they have slipped, stumbled or had to step around something. A brief conversation can reveal problems that have never appeared in an accident record.

Use that information to adjust inspections and working arrangements. Repeated reminders to “be careful” are unlikely to resolve a problem caused by the layout or cleaning process.

FAQs

Are wet floor signs enough?

They are a warning measure. The floor still needs to be made safe, with access controlled appropriately while the risk remains. HSE: Floor cleaning.

Can cleaning itself create a hazard?

Yes. Wet surfaces, equipment and cables can introduce risks that the cleaning arrangement must address. HSE: Slips and trips in cleaning.

What should a useful inspection record show?

Record the location, action required, responsible person and completion. Check whether the action solved the problem.

Improve the arrangements around everyday risks

Secure Safety Solutions can help review workplace conditions, cleaning arrangements and inspection findings, with practical actions suited to your premises.

Related guidance and support

Arrange a workplace review