COSHH & Hazardous Substances
Safety Data Sheet vs COSHH Assessment: What's the Difference?
Guidance dated 11 September 2026
A safety data sheet and a COSHH assessment are not the same thing. The safety data sheet provides information about a hazardous product. The COSHH assessment considers how exposure could occur during your work and what controls are needed.
The data sheet is an input to the assessment. Collecting sheets in a folder does not establish that the substances are being used safely. HSE explicitly distinguishes product information from the workplace assessment. [27]
What a safety data sheet tells you
An SDS is normally supplied by the product’s supplier where chemical supply rules require one. It contains information about hazards and matters such as handling, storage, exposure controls, first aid and accidental release. [27]
It is written for the product and its relevant uses. It will not know the layout of your room, the condition of your equipment or whether employees are using the product in an unexpected way.
Use the latest appropriate sheet and check that it matches the product. A similar trade name or an old formulation can lead to incorrect assumptions. Where information is unclear or does not fit the intended use, ask the supplier for clarification.
What the COSHH assessment must add
The assessment links the hazard information to the task. It establishes who could be exposed, how, for how long and under what conditions. It then determines the measures required to prevent or adequately control that exposure. [30]
For example, it may need to establish whether application by spraying creates an inhalation exposure, whether nearby workers are affected and whether the proposed extraction or protection is suitable.
It should also address foreseeable problems in the work: splashes while decanting, maintenance access, contaminated equipment or failure of a control. The result should tell managers what arrangements are necessary and employees how to work safely.
The same product can need different arrangements
Consider two illustrative uses of the same cleaning product. One team applies a small amount to a cloth at a fixed station. Another sprays it repeatedly in a confined work area. The supplier’s sheet may be identical, but the exposure circumstances are different.
The second activity should not inherit the first assessment unchanged. Check application, frequency, concentration, ventilation and other people in the area before deciding what controls are suitable.
The same reasoning applies when a process is heated, automated, moved or increased in volume. Product identity is only one part of the assessment.
How to turn the sheet into a useful assessment
Begin with a clear description of the activity. Read the relevant product information, observe the task and speak to the people doing it. Compare the recommended precautions with the controls that actually exist.
Then resolve the practical questions. Which dispensing arrangement will be used? Where will the substance be stored? What equipment must be available? What does a worker do if extraction fails or a container leaks?
If PPE is needed, specify it with enough information for suitable selection. Do not simply transfer a generic protective equipment symbol from the SDS into the form and assume the decision is complete.
Record any information still required and obtain it before allowing work that depends on it. A completed form with unresolved control questions is not a finished assessment.
Remember exposures without a product sheet
Some hazardous substances arise from the work rather than arriving in a labelled container. Dust from cutting or sanding is a useful example. An SDS collection cannot be a complete inventory of these exposures. [31]
Include those activities in the assessment process and use relevant technical information and competent advice. The absence of a sheet does not mean there is no COSHH risk.
Keep the relationship between records clear
A useful register links each current product or process to its assessment and supporting information. Mark superseded documents and make current instructions easy to find.
When an SDS changes, check whether the revised information affects the assessment. When the task changes, review the assessment even if the SDS has not changed. Those are two different routes by which the existing decision may need revisiting.
This guide explains the Great Britain approach. For Northern Ireland operations, use the applicable Northern Ireland COSHH and chemical supply requirements.
FAQs
Can I rename an SDS as a COSHH assessment
No. Changing the title does not add the workplace-specific consideration of exposure and controls that an assessment needs.
Does every product need an SDS
Supply requirements depend on the substance or mixture and the applicable rules. Some hazardous exposures arise from processes without an SDS. Assess the hazard rather than using the presence of a sheet as the test.
Should employees have to read the entire SDS
Provide the information and instructions they need in an understandable form and make relevant safety information accessible. A suitable task briefing can explain the controls more clearly than handing over a technical sheet alone.
How Secure Safety Solutions can help
If your COSHH folder is mainly safety data sheets, we can help turn that information into assessments and instructions linked to the work. We can also identify products and processes missing from the current register.
Get your COSHH arrangements in order
Sources and further reading
- [27] HSE: Chemical safety data sheets
- [30] HSE: COSHH assessment and exposure controls
- [31] HSE: Hazardous substances at work INDG136
General guidance. The arrangements you need depend on your activities, premises and location.
