COSHH & Hazardous Substances
Face Fit Testing and RPE: What Employers Need to Get Right
Guidance dated 11 September 2026
Buying a box of masks does not establish that staff are protected. Respiratory protective equipment, or RPE, must suit the hazard, the task and the person wearing it. A good filter cannot compensate for contaminated air leaking around a poor face seal.
This article follows HSE guidance for Great Britain. Check the applicable Northern Ireland requirements for work there.
Select protection before arranging the test
Use the assessment to establish the type and level of protection needed. Consider the substance, exposure, duration, working conditions and other protective equipment. RPE should form part of the control arrangements, with clear instructions for use, storage and maintenance. [49]
A face fit test answers a particular question about the fit of a tight-fitting facepiece on its wearer. It does not establish that the selected filter protects against every substance or that the device is suitable for every environment.
Filtering respirators do not supply oxygen. HSE distinguishes them from breathing apparatus and makes clear that only breathing apparatus is suitable for oxygen-deficient atmospheres. [48] Such work needs specialist assessment and arrangements; changing a filter is not a solution.
Match the test to the equipment issued
Tight-fitting facepieces need fit testing for the individual wearer. HSE advises selecting from adequate models and ensuring the exact make, model, type and size successfully tested is available for use. If someone uses more than one type, each needs the relevant fit test. [46]
Connect the test record with purchasing. If the usual stock is unavailable, a similar-looking substitute may not fit the same way. Make the approval process clear before a purchasing change reaches the people doing the work.
For example, a supervisor may have valid records for one disposable respirator while the stores cupboard contains a different model. Both records and stock can look complete individually, yet the protection arrangement does not match.
Address facial hair and compatibility
Stubble or beards in the sealing area prevent a reliable seal for tight-fitting masks. Suitable loose-fitting alternatives may be available where a tight face seal cannot be achieved. [46,48]
Resolve this during selection, with the wearer involved. Do not wait until someone arrives for a hazardous task to discover that the only available equipment is unsuitable. Check compatibility with the other equipment used for that task, including eye and head protection.
Distinguish testing from the wearer seal check
A competent fit tester uses an appropriate method to assess the selected facepiece. The wearer must also carry out the manufacturer's pre-use seal check each time the facepiece is put on. That check is not a replacement for fit testing. [47]
Train users to recognise poor fit, damage and changes requiring advice. Keep test records accessible and respond when the equipment or wearer circumstances change. A past pass should not be treated as permission to ignore an obvious problem today.
Make the arrangement work between tests
Provide suitable storage, replacement filters or disposable items, cleaning arrangements where relevant and a reliable route for reporting defects. Check how people use the RPE during an ordinary task, including pauses and communication.
If people routinely remove protection because the work is uncomfortable or difficult, investigate the reason. Repeating an instruction without addressing suitability can leave the same exposure in place.
FAQs
Does passing a fit test cover every mask?
No. It relates to the tested facepiece. Confirm that the equipment issued matches the successful test record. [46]
Is a seal check the same as a fit test?
No. The wearer seal check is needed each time the facepiece is worn; fit testing is a separate assessment using an appropriate method. [47]
Can someone with a beard use respiratory protection?
Suitable alternatives that do not depend on a tight face seal may be available. They must still provide the protection required for the work. [48,49]
How Secure Safety Solutions can help
We can help review how RPE selection, training, records and supervision fit into your COSHH arrangements. We can also identify where competent fit-testing or specialist respiratory-protection advice is needed.
Review your respiratory protection arrangements
Sources and further reading
- [46] HSE: Face fit testing basics
- [47] HSE: RPE fit testing guidance INDG479
- [48] HSE: Types of respiratory protective equipment
- [49] HSE: Respiratory protective equipment HSG53
General guidance. The arrangements you need depend on your activities, premises and location.
