Engineering & Automotive Safety
PUWER Explained: What Should Employers Check About Work Equipment?
Guidance dated 11 September 2026. Covers Great Britain; Northern Ireland has separate legislation.
Start with how the equipment is used
Work equipment includes far more than large production machinery. It can include tools, cleaning equipment and other equipment provided for work.
The Provision and Use of Work Equipment Regulations 1998, usually called PUWER, require equipment to be suitable, maintained in a safe condition and used by people with adequate information and training. Protective measures must address the risks involved. HSE: PUWER overview.
A useful review starts beside the equipment. Ask the operator to explain the job, including what happens when something goes wrong.
Look beyond normal operation
A machine may appear well controlled while it is running normally. The difficult questions often arise during cleaning, adjustment, fault-finding or maintenance.
Consider:
- How material is loaded and removed.
- Whether anyone needs access near dangerous moving parts.
- How blockages are dealt with.
- How equipment is isolated before intervention.
- Who is authorised to adjust, repair or restart it.
Guarding and safe maintenance arrangements need to reflect these activities. An emergency stop does not replace the other protective measures required. HSE: PUWER overview.
For example, a written instruction to “clear jams safely” gives an operator little help. The arrangement needs to explain what they can do, when they must stop and who takes over.
Set appropriate inspection arrangements
Not every item needs a formal inspection. Where safety depends on installation, or deterioration could create significant danger, inspection requirements need to be established.
Frequency should reflect risk, operating conditions and relevant manufacturer recommendations. There is no single annual inspection interval covering all work equipment.
Records of required inspections should be retained at least until the next inspection. Exceptional events, such as suspected serious damage or major modifications, can also trigger a need for inspection. HSE: Inspection of work equipment.
Make defect reporting effective
A reporting process should lead to a decision. Employees need to know who to tell, how unsafe equipment is taken out of use and who can authorise its return.
A practical equipment register can help bring together the equipment location, responsible person, relevant instructions and planned checks. Its value comes from helping people manage the equipment, rather than simply listing what the business owns.
Check training against the task
Attendance at training is useful evidence, but managers should also consider whether someone can use the equipment safely in the circumstances they face.
Training needs depend on the work, existing competence and supervision. Review those needs when equipment or tasks change. HSE: Training and competence.
FAQs
Does hired equipment need checking?
Yes. Where inspection is required, confirm it has taken place and obtain appropriate evidence. Also check suitability for your intended use. HSE: Inspection of work equipment.
Is an equipment service the same as a safety inspection?
Do not assume the scopes are identical. Check what the service includes and whether it addresses the inspection needs identified for that equipment.
Who can carry out an inspection?
The person needs the knowledge and experience appropriate to the equipment and inspection involved. More complex equipment may need specialist input. HSE: Inspection of work equipment.
Bring your equipment arrangements together
Secure Safety Solutions can help review risk assessments, equipment management, training records and improvement priorities, including identifying where specialist examination or technical advice is required.
