← Knowledge Hub

Fire Safety

Fire Risk Assessments: A Guide for Businesses

A fire risk assessment examines how a fire could start, who could be harmed and whether the precautions are suitable. It should give the people responsible for the premises a clear basis for preventing fire and protecting occupants.

The assessment is part of an ongoing management process. Commissioning a report does not, by itself, complete your fire safety responsibilities. The findings need to be understood, acted on and kept under review.

Know which legal framework applies

In England and Wales, the Regulatory Reform (Fire Safety) Order 2005 applies to most non-domestic premises and relevant parts of multi-occupied residential buildings. The Responsible Person must arrange a suitable and sufficient assessment and review it regularly. [14]

Scotland uses its own fire safety legislation and dutyholder framework. Northern Ireland also has separate fire safety legislation. The practical need to assess risk remains, but legal wording and recording requirements should be checked for the location. [17,18]

This guide concentrates on ordinary business premises in England and Wales. Specialist premises, residential buildings and complex fire strategies can require additional assessment and duties.

What the assessment should examine

A useful assessment considers the building, its use and the people who may be present. Fire hazards, escape arrangements, warning systems, fire protection measures and management all need to be considered together. [14]

The assessor should understand when the premises are occupied, what activities take place and whether anyone could need assistance to leave. Storage, contractors, charging equipment and out-of-hours activities may change the risk from the one suggested by a daytime office visit.

Provide available plans, previous assessments, action records and relevant maintenance information. Make clear which areas cannot be accessed and what remains unknown. Missing evidence should be identified in the report so it can be resolved, rather than quietly treated as satisfactory.

Choose an assessor who understands the premises

Competence needs to match the building and its risks. Experience with a simple office does not automatically demonstrate competence for a complex residential or industrial building. Ask about relevant experience, qualifications, assessment methods and the limits of the proposed scope.

Clarify whether the work includes only a fire risk assessment or also specialist investigations. A general assessment may identify a need for closer examination of fire doors, compartmentation or technical systems without providing that investigation itself.

Record who completed the assessment. If you use an external assessor, the Responsible Person retains responsibility for ensuring the assessment is suitable and sufficient. [15]

Expect an action plan you can use

A finding should explain the issue, where it occurs and what needs attention. Priorities should reflect the risk, with a clear distinction between urgent protective action and longer-term improvement.

For example, “review escape arrangements” is difficult to allocate. A more useful finding identifies the affected area, why the current route or arrangement is unsuitable and what competent review is needed. The precise solution may require further technical work, but the next step should be clear.

Assign an owner and target date to each action. Record the evidence of completion and check that the work achieved the intended result. An invoice for repairs is not always enough to establish that a defect has been properly resolved.

Keep the full assessment and supporting records

Since 1 October 2023, Responsible Persons in England and Wales must record the fire risk assessment in full and their fire safety arrangements, regardless of employee numbers. The old five-employee recording threshold should not be applied to these premises. [15]

Keep the report accessible alongside the action plan and relevant records of maintenance, checks and training. Where responsibility is shared, ensure the people involved receive the information they need and understand any actions affecting them. [16]

Make the assessment part of daily management

Check that escape routes remain usable, defects are reported and staff know the emergency arrangements. Consider proposed alterations before they happen. A new partition, storage area or change in occupancy can affect earlier assumptions.

Use regular reviews to judge whether the assessment still represents the premises. Review sooner where a significant change or a reason to doubt its validity arises. Do not wait for a scheduled visit to address an urgent defect.

FAQs

Can we complete the assessment ourselves

For straightforward premises, that may be possible if you have the necessary competence. More complex risks need suitable expertise. The quality and suitability of the assessment are what matter.

Is the assessment a fire safety certificate

No. It assesses the risks and required precautions. It does not certify that every aspect of the building is compliant or remove the need for ongoing management.

Will the fire service do it for us

Do not rely on the fire service to prepare your assessment. The duty sits with the people responsible for the premises; enforcing authorities may inspect the arrangements. [14]

How Secure Safety Solutions can help

Secure Safety Solutions provides fire risk assessment support with clear findings and prioritised actions. Tell us about your premises, their use and any existing concerns so we can establish the appropriate scope.

Enquire about a fire risk assessment