Workplace Safety
Working at Height: What Employers Need to Plan Before Work Starts
Guidance dated 11 September 2026
Work at height needs planning before somebody brings out a ladder. The important decisions concern the task, how people will reach it and what will prevent a fall throughout the work.
The Work at Height Regulations 2005 apply in Great Britain. Northern Ireland has separate regulations; use the relevant local framework for work there.
Recognise work at height
Work at height includes situations where a fall could cause personal injury if precautions were absent. It is not limited to roofs or scaffolding, and there is no general two-metre threshold below which the duties disappear. Employers must plan and supervise the work and use competent people and suitable equipment. [5]
A stockroom task, inspection over a pit or short maintenance job may need attention even when it has become routine. Start by describing the work precisely. “General maintenance” gives too little information to choose an access method.
Follow the control hierarchy
First consider whether the work can be completed without working at height. If it cannot, prevent falls through a safe existing place or suitable equipment. Where a fall risk remains, minimise the distance and consequences. Consider collective protection before measures that depend on each person using personal protective equipment correctly. [5,6]
Apply that sequence to the actual job. An item mounted high on a wall may be easier to maintain if its location changes during refurbishment. For recurring work, that design decision may be more useful than repeatedly arranging temporary access.
Select equipment around the work
Consider what the person must reach, carry and use, how long the work lasts and how often it happens. Include access, available space and the conditions around the working position. Equipment suitable for one part of a site may not suit another.
Ladders are not banned. HSE recognises their use for appropriate low-risk, short-duration work, but they should not be an automatic choice. [7] Check whether the task can be completed safely from the proposed ladder; familiarity with it is not evidence of suitability.
For example, a contractor may describe a job as changing a fitting. If the fitting is seized and requires prolonged force or extra equipment, the assumptions behind the original access choice may no longer hold. Agree what should trigger a pause and reassessment.
Include the surrounding risks
The plan should address fragile surfaces, falling objects and safe access to and from the working position. Equipment must be suitable and maintained, and emergency evacuation and rescue need consideration. [5]
Look beyond the person doing the work. A task above a doorway affects people using that entrance. Establish who controls access below and how the restriction will remain effective when the normal site contact is elsewhere.
Where contractors are involved, share relevant site information before they finalise their method. Confirm who checks readiness and who can authorise a change. A RAMS document that describes different equipment or a different location is a prompt to resolve the mismatch.
Make the start check meaningful
Before work begins, confirm that the planned equipment, competent people and agreed precautions are present. Check that the conditions still match the assessment. Delivery delays, poor weather or another contractor occupying the working area may change the decision.
An emergency arrangement needs to be workable for the access system and location. Identify who will respond, what they need and how they will reach the person. Resolve missing arrangements before work depends on them.
FAQs
Do the rules apply below two metres?
Yes, where a fall could cause personal injury. Assess the potential harm and the task rather than applying a blanket height cut-off. [5]
Can we still use stepladders?
Yes, when the assessment shows they are suitable for the work. Select the right equipment and follow the relevant safe-use guidance. [7]
Does a contractor's RAMS remove our involvement?
No. You still need to provide relevant site information and coordinate the work with activities under your control. Check that the agreed arrangements can actually be implemented.
How Secure Safety Solutions can help
We can review the assessment, RAMS and site arrangements with you, identifying gaps in planning or coordination before work starts. Tell us the task, location and proposed access method so the discussion is grounded in the job.
Talk to us about work at height planning
Sources and further reading
- [5] HSE: Introduction to working at height safely
- [6] HSE: Assessing all work at height
- [7] HSE: Safe use of ladders and stepladders
General guidance. The arrangements you need depend on your activities, premises and location.
